|
| Brand Name: | OEM |
| MOQ: | Negotiable |
| Price: | Negotiable |
| Delivery Time: | 15-30 DAYS |
| Payment Terms: | L/C, T/T, Western Union |
High Power Prismatic Lithium Ion Battery Blue PVC Packing For Model Airplane
Specification
| Items | Specification | Remark |
| Capacity | 4Ah | 0.2C Standard discharge |
| Nominal Voltage | 3.7V | Mean Operation Voltage |
|
Voltage at end of Discharge
|
3.0V |
Discharge Cut-off Voltage
|
| Charge Voltage | 4.2V±0.03V | By standard charge method |
| Cell Internal Impedance | ≤300Ω | IEC standard |
| Maximum charge current | 40C | For continuous charging mod |
| Maximum discharge current | 80C | For continuous discharge mod |
|
Operation Temperature Range
|
Charge:0~45℃ |
60±25%R.H. Bare Cell
|
| Discharge:-20~60℃ |
60±25%R.H. Bare Cell |
|
|
Storage Temperature Range
|
Less than 1 year: -20~25℃ |
60±25%R.H. at the shipment state
|
| less than 3 months: -20~40℃ |
60±25%R.H. at the shipment state |
|
|
Weight
|
Approx: 8g
|
Finished Cell |
|
Pack Dimension
|
Height 42mm*Width125mm Thickness 9 mm
|
max
|
Initial Performance Test
|
Item
|
Test Method and Condition
|
Requirements
|
Voltage
|
The open-circuit voltage shall be measured within 24 hours after standard charge.
|
≥3.7V |
|
Internal resistance measured at AC 1KHz after 50% charge.
|
≤12mΩ |
Capacity
|
The capacity on 0.2C5A discharge till the voltage tapered to 2V shall be measured after rested for 30min then finish standard charge. |
Discharge Capacity
≥4000mAh |
Temperature Dependence of discharge capacity
Cells shall be charged per table 1 and discharged @0.2C5A to 2 volts. Except to be discharged at temperatures per Table 4. Cells shall be stored for 3 hours at the test temperature prior to discharging and then shall be discharged at the test temperature. The capacity of a cell at each temperature shall be compared to the capacity achieved at 23 ºC and the percentage shall be calculated. Each cell shall meet or exceed the requirements of Table 4.
Prohibition short circuit
Never make short circuit cell.
It generates very high current which causes heating of the cells may cause electrolyte leakage, gassing or explosion that are very dangerous.
The LIP tabs may be easily short-circuited by putting them on conductive surface.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the battery pack.
LIP cells have less mechanical endurance than metal-can-cased LIB.
Falling, hitting, bending, etc. may cause degradation of LIP characteristics.
Handling of tabs
The battery tabs are not so stubborn especially for aluminum tab.
Don’t bend tab.
Do not bend tabs unnecessarily
|
|
| Brand Name: | OEM |
| MOQ: | Negotiable |
| Price: | Negotiable |
| Packaging Details: | Standard Export Packing |
| Payment Terms: | L/C, T/T, Western Union |
High Power Prismatic Lithium Ion Battery Blue PVC Packing For Model Airplane
Specification
| Items | Specification | Remark |
| Capacity | 4Ah | 0.2C Standard discharge |
| Nominal Voltage | 3.7V | Mean Operation Voltage |
|
Voltage at end of Discharge
|
3.0V |
Discharge Cut-off Voltage
|
| Charge Voltage | 4.2V±0.03V | By standard charge method |
| Cell Internal Impedance | ≤300Ω | IEC standard |
| Maximum charge current | 40C | For continuous charging mod |
| Maximum discharge current | 80C | For continuous discharge mod |
|
Operation Temperature Range
|
Charge:0~45℃ |
60±25%R.H. Bare Cell
|
| Discharge:-20~60℃ |
60±25%R.H. Bare Cell |
|
|
Storage Temperature Range
|
Less than 1 year: -20~25℃ |
60±25%R.H. at the shipment state
|
| less than 3 months: -20~40℃ |
60±25%R.H. at the shipment state |
|
|
Weight
|
Approx: 8g
|
Finished Cell |
|
Pack Dimension
|
Height 42mm*Width125mm Thickness 9 mm
|
max
|
Initial Performance Test
|
Item
|
Test Method and Condition
|
Requirements
|
Voltage
|
The open-circuit voltage shall be measured within 24 hours after standard charge.
|
≥3.7V |
|
Internal resistance measured at AC 1KHz after 50% charge.
|
≤12mΩ |
Capacity
|
The capacity on 0.2C5A discharge till the voltage tapered to 2V shall be measured after rested for 30min then finish standard charge. |
Discharge Capacity
≥4000mAh |
Temperature Dependence of discharge capacity
Cells shall be charged per table 1 and discharged @0.2C5A to 2 volts. Except to be discharged at temperatures per Table 4. Cells shall be stored for 3 hours at the test temperature prior to discharging and then shall be discharged at the test temperature. The capacity of a cell at each temperature shall be compared to the capacity achieved at 23 ºC and the percentage shall be calculated. Each cell shall meet or exceed the requirements of Table 4.
Prohibition short circuit
Never make short circuit cell.
It generates very high current which causes heating of the cells may cause electrolyte leakage, gassing or explosion that are very dangerous.
The LIP tabs may be easily short-circuited by putting them on conductive surface.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the battery pack.
LIP cells have less mechanical endurance than metal-can-cased LIB.
Falling, hitting, bending, etc. may cause degradation of LIP characteristics.
Handling of tabs
The battery tabs are not so stubborn especially for aluminum tab.
Don’t bend tab.
Do not bend tabs unnecessarily
